TEEJET 5000 OPERATORS MANUAL BALER
6.5
BALER ENCODE
This menu allows the operator to encode the various settings that are necessary
for spreading. Each implement has it’s own set of encodements. Encodements
such as speed sensor (and its calibration) have their own values under each
implement.
Always check these encodements in the status screen each time you change
implements.
WEIGHING (RPM3)
Selecting this encodement gives you 2 options:
1. WEIGHING
2. RPM3
WEIGHING (bale weight).
A new function key is displayed when weighing is selected, “CALIB. CALC.”
CALIBRATION:
Pressing this key displays the following:
To Next Page
Loading...