FERTILISER DISTRIBUTOR, RAUCH BETA/DELTA TEEJET 5000 OPERATORS MANUAL
4.106
POS.: Actuator position. Reference figure for
the gate position (only displayed on this
page in the DELTA program).
HOPPER
CONT.: Amount remaining in tank.
POS.: Pressing this key displays the gate position, changes between the
left- and right-hand side.
HOPPER
CONT.: The calculated fertiliser amount remaining in the tank.
Presupposes encodement of the amount filled into the hopper
before work commences.
2. MANUAL APPLICATION CONTROL
HA: Area.
KG: Consumption in KG.
KG LEFT: How many KG are left in the hopper at
present.
HA: Area counter. Worked area since the last reset.
NOTE: Total area counter is found in “DATA/DELETE”.
KG: Total KG used calculated from forward speed and gate position.
This function presupposes correct calibration.
NOTE: Total KG counter is found in “DATA/DELETE”.
KG REST: Total KG remaining in the hopper (the amount must be encoded
before start).
Pressing the “NEXT PAGE” key displays the next functions.
EMPTY
HOPPER: Pressing this key opens the gate
completely to enable the hopper to be
emptied (only found in the BETA
program).
RPM: Disc speed.
AUTO/MAN: Changing between automatic or manual
operation.
To Next Page
Loading...