TEEJET 5000 OPERATORS MANUAL GENERAL FUNCTIONS
2.11
SETTING “TERMINAL” UP.
Double click on the “Terminal” icon. You can find the program icons in various
places, depending on the way that Windows has been set-up. Refer to the
Windows operator manuals for further instruction.
Figure 1. Screen shot of settings/terminal preferences. (Windows Terminal)
Figure 2. Screen shot of settings/communications set-up. (Windows Terminal)
When you have finished set-up, choose “Save As” in the file menu. A dialogue box
is shown where it is possible to save the set-up to a file. The program suggests
.trm as the file type. Next time you wish to transfer data, all you have to do is open
this file and all the settings will be correct.
Choose the
Com. Port that
corresponds to
the serial port
being used
To Next Page
Loading...