TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BREDAL
4.43
KG/LEFT:
The amount filled into the spreader must be encoded here; to be able to see how
much fertiliser is left in the hopper.
NOTE: If there is some fertiliser left in the hopper before refilling, then this
amount must be added to the amount filled thus:
Amount left in hopper + filled amount = Kg. left.
HA LEFT
Encode the size of the field to be spread here. END TIME, is calculated from this
encodement.
WEIGHING
If the spreader is equipped with weigh cells, then set
weighing to ON otherwise set this to OFF.
WEIGHING ON:
If this function is required then the weighing system must be calibrated, this is
done as follows: