TEEJET 5000 OPERATORS MANUAL FERTILISER DISTRIBUTOR, BREDAL HYDR. K
4.65
+XX%: Percentile increase of the encoded application rate. The size of
the steps is altered in encode.
-XX%: Percentile reduction of the encoded application rate. The size of
the steps is altered in encode.
NORMAL: (Only displayed if the step feature has been used)
Normal application rate. Regardless of how many steps the
application rate has been increased/decreased by, pressing this
key will return the application rate to normal.
DOSE RATE: Pressing this key allows the application rate to be altered directly
from the operation screen (see also DOSE RATE in encode).
Pressing the “NEXT PAGE” key displays the next functions.
RPM 1: Weighing in KG using weigh cells fitted
on the spreader (only displayed if
WEIGHING ON is selected under
encode).
RPM BELT: Tarring the weigh cells, this key must be
held down for approx. 3 seconds (only
displayed if WEIGHING ON is selected
under encode).
Pressing the “NEXT PAGE” key displays the next functions.
WEIGHT: Weighing in KG using weigh cells fitted
on the spreader (only displayed if
WEIGHING ON is selected under
encode).
TARRING: Tarring the weigh cells, this key must
be held down for approx. 3 seconds
(only displayed if WEIGHING ON is
selected under encode).
Using weighing (if the system is fitted with weigh cells).
Calibrating the weigh cells is a condition for correct operation. The calibration
procedure is described under “ENCODE”.
To Next Page
Loading...