CHAPTER 10
Installing the Cisco NCS 2002 Door and Other
Modules
This chapter describes how to install the NCS 2015 door and other modules.
The sections are:
•
Front Door, page 107
•
NTP-L29 Installing the Standard Door of the NCS 2002 Shelf, page 108
•
NTP-L30 Opening and Removing the Standard Door of the NCS 2002 Shelf, page 111
•
NTP-L40 Installing the Deep-Front Panel of the NCS 2002 Shelf, page 115
•
NTP-G331 Removing the Deep-Front Panel of the NCS 2002 Shelf , page 121
•
Power Modules, page 124
•
NTP-L33 Installing the Power Module in the NCS 2002 Shelf, page 126
•
Fan-Tray Assembly, page 131
•
NTP-L35 Installing the Fan-Tray Assembly in the NCS 2002 Shelf, page 132
•
Air Filter , page 135
Front Door
The front door of the NCS 2002 provides access to the shelf and air-filter.
There are two types of front doors that act as protective panels—standard door and deep-front panel. The
deep-front panel provides additional space in front of the shelf to accommodate cables that do not fit inside
the standard door. The deep-front panel provides more space for fiber bend radius and to manage the line card
connections. The deep-front panel does not have a hinge and cannot be rotated like the standard door.
If a standard front door was ordered, the NCS 2002 is shipped with a preinstalled standard door. If a deep-front
panel was ordered, it is shipped in a separate package.
You can remove the door to provide unrestricted access to the front of the shelf.
Cisco NCS 2000 Series Hardware Installation Guide
107
To Next Page
Loading...
Need help?
General
