Cisco NCS 2006 User Manual

An improper removal (IMPROPRMVL) alarm is raised whenever a card pull (reseat) is performed, unless
the card is deleted in CTC first. The alarm clears after the card replacement is complete.
Note
NTP-L41 Unpacking and Inspecting the Shelf
This procedure explains how to unpack the NCS 2002,
NCS 2006, and NCS 2015 shelves and verify their
contents.
Purpose
NoneTools/Equipment
NonePrerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1
Complete the DLP-L62 Unpacking and Verifying the Shelf , on page 20.
Step 2
Complete the DLP-L63 Inspecting the Shelf, on page 22.
Stop. You have completed this procedure.
DLP-L62 Unpacking and Verifying the Shelf
This task removes the shelves from the package.Purpose
NoneTools/Equipment
NonePrerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
20
Preparing to Install the Cisco NCS 2002, NCS 2006, and NCS 2015 Shelf
NTP-L41 Unpacking and Inspecting the Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English