The following figure shows the NCS 2015 laser warning.
Figure 205: Laser Warning on the NCS 2015
NTP-L67 Installing Fiber Tray of NCS 2015 Shelf
This procedure installs the standard or extended fiber
tray of the NCS 2015 shelf.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
NonePrerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
The standard fiber tray is included in the standard door PID and the extended fiber tray is included in the
deep door PID.
Note
Cisco NCS 2000 Series Hardware Installation Guide
362
Installing the Cisco NCS 2015 Door and Other Modules
NTP-L67 Installing Fiber Tray of NCS 2015 Shelf