Cisco NCS 2006 User Manual

Procedure
Step 1
Open the front door of the shelf assembly (see DLP-L12 Opening the Standard Door of the NCS 2006 Shelf
, on page 253). If the shelf assembly does not have a front door, continue with Step 3.
Step 2
(Optional) Complete the DLP-L13 Removing the Standard Door of the NCS 2006 Shelf , on page 255 to
remove the front door. If you do not want to remove the door, proceed to Step 3.
Step 3
Remove the air filter on the AC power module (see the figure below).
Figure 246: Replacing the Air Filter — AC Power Module
Step 4
Replace the air filter with a new one if the air filter is dirty or clogged with dust.
Step 5
Close the front door. If you removed the door, complete the NTP-L4 Installing the Standard Door of the NCS
2006 Shelf , on page 247.
Stop. You have completed this procedure.
NTP-L58 Replacing the Air Filter of the NCS 2015 Shelf Assembly
This procedure replaces the air filter of the NCS 2015
shelf assembly.
Purpose
Cisco NCS 2000 Series Hardware Installation Guide
448
Maintaining the NCS 2002, NCS 2006, and NCS 2015 Shelves
NTP-L58 Replacing the Air Filter of the NCS 2015 Shelf Assembly

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English