Cisco NCS 2006 - DLP-L38 Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack Configuration

NTP-L41 Unpacking and Inspecting the Shelf, on
page 20
Prerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Perform these procedures as required:
•
DLP-L38 Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack Configuration, on page 52
•
DLP-L39 Mounting the Air Deflectors (Front-to-Front) on the NCS 2002 Shelf for ETSI Rack
Configuration, on page 54
•
DLP-L40 Mounting the Bracket with Air Deflectors (Front-to-Back) on the NCS 2002 Shelf for ETSI
Rack Configuration, on page 55
Stop. You have completed this procedure.
DLP-L38 Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack
Configuration
This task installs the mounting brackets on the NCS
2002 shelf for ETSI rack configuration.
In an ETSI rack, the air deflectors can be
mounted only in the front position of the
chassis.
Note
Purpose
•
#2 Phillips Dynamometric screwdriver
•
Medium slot-head screwdriver
•
Small slot-head screwdriver
Tools/Equipment
NTP-L41 Unpacking and Inspecting the Shelf, on
page 20.
Prerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
52
Mounting the Cisco NCS 2002 Brackets
DLP-L38 Mounting the Brackets on the NCS 2002 Shelf for ETSI Rack Configuration