Cisco NCS 2006 - NTP-L65 Configure the MS-ISC-100 T Card for a ONS 15454 Multishelf Node for Non-Default Public and Private VLAN IDs

NoneSecurity Level
The plug-socket combination must be accessible at all times because it serves as the main
disconnecting device. Statement 1019
Warning
Procedure
Step 1
Complete DLP-L82 Installing AC Power Module in NCS 2015 Shelf, on page 389
Step 2
Complete DLP-L75 Installing DC Power Module in NCS 2015 Shelf, on page 391
Step 3
Complete the NTP-L57 Installing Power and Ground to the NCS 2015 Shelf , on page 333.
Stop. You have completed this procedure.
DLP-L82 Installing AC Power Module in NCS 2015 Shelf
This procedure installs the NCS4K-AC-PSU power
module in the NCS 2015 shelf.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
nonePrerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
389
Installing the Cisco NCS 2015 Door and Other Modules
DLP-L82 Installing AC Power Module in NCS 2015 Shelf