Cisco NCS 2006 User Manual

NCS 2006 Shelf Specifications
This section provides specifications for shelf bandwidth; a list of topologies; Cisco Transport Controller (CTC)
specifications; the LAN, Transaction Language One (TL1), modem, and alarm specifications; timing, power,
and environmental specifications; and NCS 2006 shelf dimensions.
Bandwidth
The NCS 2006 has the following bandwidth specifications (depending on the applications):
•
Total bandwidth: 600 Gbps
•
Data plane bandwidth: 100 Gbps per slot
Configurations
The NCS 2006 can be configured for the following dense wavelength division multiplexing (DWDM)
topologies:
•
Hubbed rings
•
Multihubbed rings
•
Point-to-point
•
Linear
•
Linear with optical add/drop multiplexing (OADM)
•
Hybrid terminal node
•
Hybrid OADM node
•
Hybrid line amplifier node
•
Transponder Shelf
•
Layer 2 aggregation shelf
Cisco Transport Controller
CTC, the NCS 2006 craft interface software, has the following specifications:
•
10/100BaseT Ethernet
•
TNC/TNCE/TSC/TSCE card access: RJ-45 LAN connector on the controller front plate
•
Shelf access: RJ-45 LAN Connector located on the ECU or ECU2
Cisco NCS 2000 Series Hardware Installation Guide
467
Hardware Specifications
NCS 2006 Shelf Specifications

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English