CHAPTER 25
Installing the Cisco NCS 2015 Door and Other
Modules
This chapter describes how to install the NCS 2015 door and other modules.
The sections are:
•
Front Door, page 361
•
NTP-L67 Installing Fiber Tray of NCS 2015 Shelf , page 362
•
NTP-L50 Installing Standard Door of NCS 2015 Shelf , page 366
•
NTP-L61 Installing Deep Door of NCS 2015 Shelf , page 372
•
NTP-L51 Opening and Removing the Door of the NCS 2015 Shelf , page 381
•
External Connection Units, page 382
•
NTP-L52 Install NCS 2015 ECU Module, page 384
•
Power Modules, page 387
•
NTP-L53 Installing the Power Modules in NCS 2015 Shelf , page 388
•
LCD Unit, page 392
•
Fan-Tray Assembly , page 392
•
NTP-L54 Installing Fan-Tray Assembly in NCS 2015 Shelf, page 393
•
Air Filter , page 398
Front Door
The front door of NCS 2015 provides access to the shelf, fiber-routing tray, fan-tray assembly, and LCD
screen.
There are two types of front doors that act as protective panels—standard door and deep door. The deep door
provides additional space in front of the shelf to accommodate cables that do not fit inside the standard door.
The deep door does not have a hinge and cannot be rotated like the standard door.
The laser warning label is placed on the rear of the chassis.
Cisco NCS 2000 Series Hardware Installation Guide
361
To Next Page
Loading...
Need help?
General
