Table 19: NCS 2015 Shelf Installation Task Summary
CompletedDescription
NTP-L41 Unpacking and Inspecting the Shelf, on
page 20
NTP-L47 Mounting NCS 2015 Shelf, on page 317
Connect the chassis to the office ground. For detailed
instructions on how to ground the chassis, refer to the
Electrostatic Discharge and Grounding Guide for
Cisco NCS 2000 Series .
NTP-L51 Opening and Removing the Door of the
NCS 2015 Shelf , on page 381
NTP-L53 Installing the Power Modules in NCS 2015
Shelf , on page 388
NTP-L57 Installing Power and Ground to the NCS
2015 Shelf , on page 333
NTP-L54 Installing Fan-Tray Assembly in NCS 2015
Shelf, on page 393
DLP-L62 Installing the TNC, TNCE, TSC, TSCE,
TNCS, or TNCS-O Card, on page 400
NTP-L50 Installing Standard Door of NCS 2015 Shelf
, on page 366
Step 2
Complete the DLP-L63 Inspecting the Shelf, on page 22.
Step 3
Continue with Connect the PC and Log into the GUI.
Stop. You have completed this procedure.
Cisco NCS 2000 Series Hardware Installation Guide
360
NCS 2015 Shelf Installation Acceptance Test
NTP-L60 Performing NCS 2015 Shelf Installation Acceptance Test
To Next Page
Loading...
Need help?
General
