Cisco NCS 2006 User Manual

NTP-L30 Opening and Removing the Standard Door of the NCS
2002 Shelf
This procedure opens and removes the standard door
of the NCS 2002.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
•
NTP-L29 Installing the Standard Door of the
NCS 2002 Shelf, on page 108.
•
Connect the chassis to the office ground. See
Electrostatic Discharge and Grounding Guide
for Cisco NCS 2000 Series .
Prerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1
Complete the DLP-L45 Opening the Standard Door of the NCS 2002 Shelf, on page 111.
Step 2
Complete the DLP-L46 Removing the Standard Door of the NCS 2002 Shelf, on page 113.
Stop. You have completed this procedure.
DLP-L45 Opening the Standard Door of the NCS 2002 Shelf
This task opens the standard door of the NCS 2002
system.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
Cisco NCS 2000 Series Hardware Installation Guide
111
Installing the Cisco NCS 2002 Door and Other Modules
NTP-L30 Opening and Removing the Standard Door of the NCS 2002 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English