Mounting Multiple Nodes
Most standard (Telcordia GR-63-CORE, 19-inch (482.6-mm) or 23-inch (584.2-mm) 7-foot (2.133-m) racks
can hold three NCS 2015 shelves and a fuse and alarm panel. In an ANSI rack, the brackets can be mounted
in the middle position.
The NCS 2015 shelves can be mounted above each other without any space between the shelves.
ETSI Rack Installation
The NCS 2015 shelf is mounted on a 600 x 300-mm (23.6 x 11.8-inch) ETSI standard equipment rack. In an
ETSI rack, the shelf can be mounted in the middle position. The shelf projects 4.0 inches (101.6 mm) from
the front of the rack and is a total of 444.5 mm (17.5 inch) wide with no mounting ears attached.
The NCS 2015 shelf measures 24.44 inches (620.776 mm) high, 17.67 inches (448.81 mm) wide, and 11.10
inches (281.94 mm) deep. You can install up to three NCS 2015 shelves in a 7-foot (2133.6 mm) equipment
rack.
Cisco NCS 2000 Series Hardware Installation Guide
314
Mounting the Cisco NCS 2015 Shelf
Mounting Multiple Nodes
To Next Page
Loading...
Need help?
General
