CHAPTER 21
Mounting the Cisco NCS 2015 Shelf
This chapter describes how to mount the Cisco NCS 2015 shelf.
The sections are:
•
ANSI Rack Installation, page 311
•
ETSI Rack Installation, page 314
•
NTP-L47 Mounting NCS 2015 Shelf, page 317
ANSI Rack Installation
The NCS 2015 shelf is mounted on a 19-inch (482.6-mm) or 23-inch (584.2-mm) equipment rack. Make sure
that the correct type of 19-inch ANSI rack is used for mounting the NCS 2015 shelf. When the shelf is mounted
in the middle position, it projects 4.5 inches (114.3 mm) from the front of the ANSI rack and 4.0 inches (101.6
mm) from the front of the ETSI rack. The shelf mounts in both Electronic Industries Alliance (EIA) standard
and Telcordia-standard racks. The shelf is a total of 17.5 inches (431.8 mm) wide with no mounting ears
attached.
The NCS 2015 shelf measures 24.4 inches (619.76 mm) high, 17.5 inches (444.5 mm) wide, and 11.7 inches
(297.18 mm) deep. You can install up to three NCS 2015 shelves in a 7-foot (2133.6 mm) equipment rack.
Cisco NCS 2000 Series Hardware Installation Guide
311
To Next Page
Loading...
Need help?
General
