Cisco NCS 2006 - DLP-L75 Installing DC Power Module in NCS 2015 Shelf

DLP-L75 Installing DC Power Module in NCS 2015 Shelf
This procedure installs the NCS4K-DC-PSU-V1
power module in the NCS 2015 shelf.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
nonePrerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1
Remove the filler caps from the slots where you want to install the power modules.
Figure 224: Installing the DC power module
Cisco NCS 2000 Series Hardware Installation Guide
391
Installing the Cisco NCS 2015 Door and Other Modules
DLP-L75 Installing DC Power Module in NCS 2015 Shelf