Cisco NCS 2006 - Cisco Transport Controller; External LAN Interface for EMS; TL1 Craft Interface; Modem Interface

•
Line amplifier node
•
Transponder Shelf
•
Layer 2 aggregation shelf
Cisco Transport Controller
CTC, the NCS 2002 craft interface software, has these specifications:
•
10/100BaseT Ethernet
•
TNC/TNCE/TSC/TSCE card access: RJ-45 LAN connector on the controller front plate
External LAN Interface for EMS
The NCS 2002 external LAN interface has these specifications:
•
10/100BaseT Ethernet located on the power module
TL1 Craft Interface
The NCS 2002 TL1 craft interface has these specifications:
•
TNC/TNCE/TSC/TSCE access: EIA/TIA-232 DB-9 type connector
Modem Interface
The NCS 2002 modem interface has these specifications:
•
Hardware flow control
•
TNC/TNCE/TSC/TSCE: EIA/TIA-232 DB-9 type connector
Alarm Interface
The NCS 2002 does not support alarm interface.
Passive Unit Remote Inventory
The NCS 2002 provides 1 standard USB port located on the power module to retrieve the passive units
inventory data.
Cisco NCS 2000 Series Hardware Installation Guide
464
Hardware Specifications
Cisco Transport Controller