Cisco NCS 2006 User Manual

Step 2
Plug the AC power module completely into the chassis.
Step 3
Tighten the screw to a torque value of 4 in-lb (0.45 N-m) to lock the power module in the chassis (see the
figure below).
Figure 76: AC Power Module Installed in the NCS 2002 Shelf
Step 4
Return to your originating procedure.
DLP-L48 Installing the DC Power Module in the NCS 2002 Shelf
This task installs the DC power module in the NCS
2002 system.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
•
Connect the chassis to the office ground. For
detailed instructions on how to ground the
chassis, refer to the Electrostatic Discharge and
Grounding Guide for Cisco NCS 2000 Series .
Prerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
129
Installing the Cisco NCS 2002 Door and Other Modules
DLP-L48 Installing the DC Power Module in the NCS 2002 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English