Cisco NCS 2006 - Installing the Cisco NCS 2006 Door and Other Modules; Front Door

CHAPTER 18
Installing the Cisco NCS 2006 Door and Other
Modules
This chapter explains how to install the NCS 2006 door and other modules.
The sections are:
•
Front Door, page 245
•
NTP-L4 Installing the Standard Door of the NCS 2006 Shelf , page 247
•
NTP-L5 Opening and Removing the Standard Door of the NCS 2006 Shelf , page 252
•
NTP-L39 Install the Deep-Front Panel of the NCS 2006 , page 257
•
NTP-L40 Remove the Deep-Front Panel of the NCS 2006 Shelf , page 265
•
External Connection Units, page 270
•
NTP-L8 Install the NCS 2006 ECU and ECU-S Modules, page 277
•
NTP-L66 Upgrading to NCS 2006 ECU60-S Module, page 280
•
Power Modules, page 280
•
NTP-L9 Installing the Power Modules in the NCS 2006 Shelf , page 282
•
LCD Unit, page 292
•
NTP-L10 Installing the LCD Module in the NCS 2006 Shelf, page 292
•
Fan-Tray Assembly , page 295
•
NTP-L11 Installing the Fan-Tray Assembly in the NCS 2006 Shelf, page 296
•
Air Filter , page 298
Front Door
The front door of NCS 2006 provides access to the shelf, fiber-routing tray, fan-tray assembly, and LCD
screen.
Cisco NCS 2000 Series Hardware Installation Guide
245