Cisco NCS 2006 User Manual

Step 3
Swing the door open (see the figure below).
Figure 61: Cisco NCS 2002 Standard Door — Opened
Step 4
Return to your originating procedure (NTP).
DLP-L46 Removing the Standard Door of the NCS 2002 Shelf
This task removes the standard door of the NCS 2002
system.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
•
DLP-L45 Opening the Standard Door of the
NCS 2002 Shelf, on page 111.
•
Connect the chassis to the office ground. For
detailed instructions on how to ground the
chassis, refer to the Electrostatic Discharge and
Grounding Guide for Cisco NCS 2000 Series .
Prerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Cisco NCS 2000 Series Hardware Installation Guide
113
Installing the Cisco NCS 2002 Door and Other Modules
DLP-L46 Removing the Standard Door of the NCS 2002 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English