NCS 2015 Shelf Specifications
This section provides specifications for shelf bandwidth; Cisco Transport Controller (CTC) specifications;
the LAN, Transaction Language One (TL1), modem, and alarm specifications; timing, power, and environmental
specifications; and NCS 2015 shelf dimensions.
The NCS 2015 shelf is compliant with the ETS 300-119-4 standard.
Bandwidth
The per slot interconnection on NCS 2015 can be 250Gbps or 500 Gbps.
Cisco Transport Controller
CTC, the NCS 2015 craft interface software, has the following specifications:
•
10/100BaseT Ethernet
•
TNCS/TNCS-O card access: RJ-45 LAN connector on the controller front plate
•
Shelf access: RJ-45 LAN connector and optical EMS port located on the ECU. The CT/EMS copper
port functions as the craft port only in the secure mode.
External LAN Interface for EMS
The NCS 2015 external LAN interface has the following specification:
•
10/100BaseT Ethernet located on the ECU and supports:
◦
10/100 Mbps full duplex
◦
Auto detection
•
100 Mbps (FX) optical port located on the ECU and supports:
◦
100 Mbps full duplex
◦
Auto detection
TL1 Craft Interface
The NCS 2015 TL1 craft interface has the following specifications:
•
Speed: 9600 bps
•
TNCS/TNCS-O access: EIA/TIA-232 DB-9 type connector
•
An alternative RJ-45 LAN connector on TNCS/TNCS-O or ECU
•
An alternative EMS optical connector on ECU
Cisco NCS 2000 Series Hardware Installation Guide
473
Hardware Specifications
NCS 2015 Shelf Specifications
To Next Page
Loading...
