Cisco NCS 2006 User Manual

For redundant power supplies, two AC power modules can be installed in Slot A and Slot B. However,
only one power module can sustain the functioning of the entire NCS 2006 system. In that case, insert
a power filler module in the empty slot (for example, see the figure below).
Note
Figure 169: AC Power Modules Installed in the NCS 2006 Shelf
Step 3
Return to your originating procedure (NTP).
DLP-L15 Installing the DC Power Module in the NCS 2006 Shelf
This procedure installs the NCS2006-DC,
NCS2006-DC20, or NCS2006-DC40 DC power
module in the NCS2006 system.
Purpose
#2 Phillips Dynamometric screwdriverTools/Equipment
Cisco NCS 2000 Series Hardware Installation Guide
285
Installing the Cisco NCS 2006 Door and Other Modules
DLP-L15 Installing the DC Power Module in the NCS 2006 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English