Cisco NCS 2006 User Manual

CHAPTER 12
Installing the Air Flow Regulator
This chapter explains how to install the regulators to maintain the air flow for ANSI and ETSI configurations
in NCS 2006 shelf.
The air flow within the equipment must be maintained at a nominal temperature.
This task can be accomplished using one of these mechanisms:
•
Air deflector
•
Air plenum
The sections are:
•
Air Deflector, page 139
•
Air Plenum, page 140
•
Air Plenum Rack and Cabinet Compatibility, page 143
•
NTP-L43 Install the Air Plenum in NCS 2006 Shelf, page 144
•
Air Flow Performance of NCS 2006, page 161
Air Deflector
An air deflector is a sheet-metal part that is mounted on the NCS 2006 shelf to orient the air flow in a specific
direction.
The air deflectors can be mounted in different positions to control the air flow:
• Front to Front— Only ETSI rack
• Front to Back— For ANSI and ETSI racks
• Front to Top— Only ETSI rack
In an ANSI rack, the air deflectors are mounted only on the 23-inch rack configuration.
Cisco NCS 2000 Series Hardware Installation Guide
139

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English