Cisco NCS 2006 User Manual

Do not force a fan-tray assembly into place. Doing so can damage either the connectors on the fan tray
or the connectors on the backpanel of the shelf, or both.
Caution
Error messages appear on the TNC, TNCE, TSC, or TSCE card, the fan-tray LED, and in the Cisco
Transport Controller (CTC) when the fan-tray assembly is removed from the shelf or when one fan is not
working.
Note
To install the fan-tray assembly, it is not necessary to move any of the fiber-routing facilities.Note
Procedure
Step 1
Insert the fan-tray assembly inside the left slot (fan tray slot) of the NCS 2006 chassis (see the figure below).
Figure 175: Installing the Fan-Tray Assembly
Cisco NCS 2000 Series Hardware Installation Guide
297
Installing the Cisco NCS 2006 Door and Other Modules
NTP-L11 Installing the Fan-Tray Assembly in the NCS 2006 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English