•
For an AC power supply, the fuse rating must not exceed 20A. For North America, the branch circuit
protection must be rated 20A. The overcurrent/short circuit protection must be in accordance with local
and national electrical codes.
Step 2
Mount the first shelf in the bottom of the rack using DLP-L72 Mounting NCS 2015 Shelf on a Rack (One
Person), on page 319 or DLP-L73 Mounting NCS 2015 Shelf on a Rack (Two People) , on page 322.
Diagram 1 of the figure below shows multiple NCS 2015 DC shelf assemblies mounted on the ANSI rack.
Diagram 2 of the figure below shows multiple NCS 2015 DC shelf assemblies mounted on the ETSI rack.
Figure 187: Multiple NCS 2015 DC Shelves Mounted on the Rack
Cisco NCS 2000 Series Hardware Installation Guide
324
Mounting the Cisco NCS 2015 Shelf
DLP-L74 Mounting Multiple NCS 2015 Shelves on a Rack
To Next Page
Loading...
