Cisco NCS 2006 User Manual

•
NTP-L48 Mounting Brackets on NCS 2015
Shelf for ANSI Rack Configuration, on page
303
•
Connect the chassis to the office ground. For
detailed instructions on how to ground the
chassis, refer to the Electrostatic Discharge and
Grounding Guide for Cisco NCS 2000 Series .
•
NTP-L52 Install NCS 2015 ECU Module, on
page 384
•
NTP-L57 Installing Power and Ground to the
NCS 2015 Shelf , on page 333
•
NTP-L54 Installing Fan-Tray Assembly in NCS
2015 Shelf, on page 393
•
NTP-L67 Installing Fiber Tray of NCS 2015
Shelf , on page 362
Prerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1
Pull the top hinge pin down on the standard door.
The bottom hinge pin is
fixed.
Note
Cisco NCS 2000 Series Hardware Installation Guide
367
Installing the Cisco NCS 2015 Door and Other Modules
NTP-L50 Installing Standard Door of NCS 2015 Shelf

Cisco NCS 2006 Specifications

General

Brand	Cisco
Model	NCS 2006
Category	Network Hardware
Language	English