Cisco NCS 2006 - Page 40

NCS 2015NCS 2006NCS 2002Cisco Supplied Material
Double-hole power lug for DC
power connection with a wire
receptacle to accommodate the
recommended 13.29 mm² (#6
AWG) multistrand copper wire.
Based on the door that is
installed, use either short barrel
lugs or long barrel lugs:
• Standard door—Use short
barrel lug (16)
• Deep door—Use long
barrel lug (16)
—
ANSI
Double-hole power lug for DC
power connection with a wire
receptacle to accommodate the
recommended 8.4 mm² (#8
AWG) multistrand copper wire
(1)
Power Lug
ANSI
M4.0 x 6mm flat-head Phillips
screws (10)
ETSI
M4.0 x 6 flat-head Phillips
screws (10)
ANSI
#12-24 x 0.50 pan-head Phillips
screws (8)
ETSI
M6.0 x 20 pan-head Phillips
screws (8)
ANSI#12-24 x 0.50 pan-head
Phillips screws (8)
ETSI
M6.0 x 20 pan-head Phillips
screws (8)
Mounting bracket screws
•
M3 x 10 mm screws (10)
•
M3 x 8 mm screw (1) and
safety washer (1)
——
Deep door bracket screws and
washer
•
M6.0 x 16mm pan-head
Phillips screws (2)
•
M6 lock washers (2)
——
Screws and lock washers for
grounding the chassis
Tie wraps (10)Tie wraps (10)Tie wraps (10)Tie Wraps
•
ANSI
#12-24 x 0.50 inch pan-head
Phillips mounting screws (16)
•
ETSI
M6 x 20 mm pan-head Phillips
mounting screws (16)
•
Washers (16)
——
Mounting screws and washers
Cisco NCS 2000 Series Hardware Installation Guide
12
Preparing to Install the Cisco NCS 2002, NCS 2006, and NCS 2015 Shelf
Cisco Supplied Materials