Do not force a fan-tray assembly into place. Doing so can damage either the connectors on the fan tray
or the connectors on the back panel of the shelf, or both.
Caution
Error messages appear on the TNCS/TNCS-O card, the fan-tray LED, and in the Cisco Transport Controller
(CTC) when the fan-tray assembly is removed from the shelf or when a fan is not working.
Note
Cisco NCS 2000 Series Hardware Installation Guide
394
Installing the Cisco NCS 2015 Door and Other Modules
NTP-L54 Installing Fan-Tray Assembly in NCS 2015 Shelf
To Next Page
Loading...
Need help?
General
