As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Use only the fastening hardware provided with the NCS 2002 to prevent loosening, deterioration, and
electromechanical corrosion of the hardware and joined material.
Caution
When mounting the NCS 2002 in a frame with a nonconductive coating (such as paint, lacquer, or enamel)
either use the thread-forming screws provided with the NCS 2002 ship kit, or remove the coating from
the threads to ensure electrical continuity.
Caution
The mounting brackets can be installed in the front or the middle position of the chassis.Note
Cisco NCS 2000 Series Hardware Installation Guide
48
Mounting the Cisco NCS 2002 Brackets
DLP-L36 Mounting the 23-inch Brackets on the NCS 2002 Shelf for ANSI Rack Configuration
To Next Page
Loading...
Need help?
General
