Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 7: Quality of Service (QoS)
Extreme Networks EAS 100-24t Switch CLI Manual
216
Example usage:
To configure the traffic scheduling mechanism for each queue:
Example usage:
To display the current scheduling configuration:
# config scheduling 0 weight 55
Command: config scheduling 0 weight 55
Success.
#
show scheduling
Purpose Used to display the currently configured traffic scheduling on the switch.
Syntax show scheduling
Description This command is used to display the current traffic scheduling mechanisms in
use on the switch.
Parameters None.
Restrictions None.
#show scheduling
Command: show scheduling
QOS Output Scheduling
Class ID Weight
--------- -------------
Class-0 1
Class-1 2
Class-2 4
Class-3 8
#
config scheduling_mechanism
Purpose Used to configure the scheduling mechanism for the QoS function
Syntax config scheduling_mechanism [strict | weight_fair]

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English