Extreme Networks EAS 100-24t Switch CLI User Manual

Basic Switch Commands
Extreme Networks EAS 100-24t Switch CLI Manual
23
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
enable clipaging
Purpose Used to pause the scrolling of the console screen when a command displays
more than one page.
Syntax enable clipaging
Description This command is used when issuing a command which causes the console
screen to rapidly scroll through several pages. This command will cause the
console to pause at the end of each page. The default setting is enabled.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable clipaging
Command: enable clipaging
Success.
#
disable clipaging
Purpose Used to disable the pausing of the console screen scrolling at the end of each
page when a command displays more than one screen of information.
Syntax disable clipaging
Description This command is used to disable the pausing of the console screen at the end
of each page when a command would display more than one screen of
information.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable clipaging
Command: disable clipaging
Success.
#
enable telnet
Purpose Used to enable communication with and management of the switch using the
Telnet protocol.
Syntax enable telnet {<tcp_port_number 1-65535>}

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English