Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 9: Security
Extreme Networks EAS 100-24t Switch CLI Manual
238
Each command is listed, in detail, in the following sections:
Example usage:
To enable 802.1X switch wide:
Example usage:
To disable 802.1x on the switch:
show auth_client
show acct_client
create 802.1x user <username 15>
delete 802.1x user <username 15>
show 802.1x user
enable 802.1x
Purpose Used to enable the 802.1X server on the switch.
Syntax enable 802.1x
Description This command is used to enable the 802.1X Network Access control
application on the switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable 802.1x
Command: enable 802.1x
Success.
#
disable 802.1x
Purpose Used to disable the 802.1X server on the switch.
Syntax disable 802.1x
Description This command is used to disable the 802.1X Network Access control
application on the switch.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable 802.1x
Command: disable 802.1x
Success.
#
Command Parameters

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English