Extreme Networks EAS 100-24t Switch CLI - Show Auth_Statistics

802.1X Commands
Extreme Networks EAS 100-24t Switch CLI Manual
251
Example usage:
To display the current authentication session statistics for port 1:
#show auth_session_statistics ports 1
Command: show auth_session_statistics ports 1
Port number : 1
MAC address: 00-00-07-5D-60-02
SessionOctetsRx 7808
SessionOctetsTx 469102741
SessionFramesRx 122
SessionFramesTx 4196211
SessionId ether1_2-1
SessionAuthenticMethod Remote Authentication Server
SessionTime 70803
SessionTerminateCause NotTerminatedYet
SessionUserName 456
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show auth_statistics
Purpose Used to display the current authentication statistics.
Syntax show auth_statistics {ports <portlist>}
Description This command is used to display the current authentication statistics of the
switch on a per port basis.
Parameters ports <portlist> - Specifies a range of ports.
Restrictions None.