Extreme Networks EAS 100-24t Switch CLI - Disable Snmp Linkchange_Traps; Enable Snmp Linkchange_Traps

Chapter 4: Management
Extreme Networks EAS 100-24t Switch CLI Manual
84
Example usage:
To disable SNMP authentication trap support:
Example usage:
To enable SNMP linkchange trap support on the switch:
Example usage:
To disable SNMP linkchange trap support:
#disable snmp authenticate_traps
Command: disable snmp authenticate_traps
Success.
#
enable snmp linkchange_traps
Purpose This command is used to enable SNMP linkchange trap support.
Syntax enable snmp linkchange_traps
Description This command is used to enable SNMP linkchange trap support.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
#
disable snmp linkchange_traps
Purpose This command is used to disable SNMP linkchange trap support.
Syntax disable snmp linkchange_traps
Description This command is used to disable SNMP linkchange trap support.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
#