Chapter 9: Security
Extreme Networks EAS 100-24t Switch CLI Manual
266
Example usage:
To display all method lists for promoting user level privileges to administrator level privileges.
#show authen_enable all
Command: show authen_enable all
Method List Name Priority Method Name Comment
---------------- -------- ------------- ------------------
Permit 1 tacacs+ Built-in Group
2 tacacs Built-in Group
3 dbrown User-defined Group
4 local_enable Keyword
default 1 tacacs+ Built-in Group
2 local_enable Keyword
Total Entries : 2
#
config authen application
Purpose Used to configure various applications on the switch for authentication using a
previously configured method list.
Syntax config authen application [console | telnet | ssh | http | all] [login |
enable] [default| method_list_name <string 15>]
Description This command is used to configure switch configuration applications (console,
telnet, ssh, web) for login at the user level and at the administration level
(authen_enable) utilizing a previously configured method list.
To Next Page
Loading...
