Extreme Networks EAS 100-24t Switch CLI - Show Router_Ports; Show Igmp_Snooping

IGMP Snooping Commands
Extreme Networks EAS 100-24t Switch CLI Manual
135
Example usage:
To show IGMP snooping:
#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast Router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Querier State : Disabled
Querier Role : Non-Querier
Querier IP : 0.0.0.0
Querier Expiry Time : 0 secs
State : Disabled
Fast Leave : Disabled
Version : 3
Total Entries : 1
#
show router_ports
Purpose Used to display the currently configured router ports on the switch.
Syntax show router_ports {[vlan <vlan_name 32> | vlanid <vidlist>]} {[static |
dynamic | forbidden]}
Description This command is used to display the router ports currently configured on the
switch.
Parameters <vlan_name 32> - The name of the VLAN on which the router port resides.
<vidlist> - The VID range of the router ports to be displayed.
static - Displays router ports that have been statically configured.
dynamic - Displays router ports that have been dynamically configured.
forbidden - Displays forbidden router ports that have been statically
configured.
Restrictions None.