Extreme Networks EAS 100-24t Switch CLI - Show Auth_Session_Statistics

Chapter 9: Security
Extreme Networks EAS 100-24t Switch CLI Manual
250
Example usage:
To display the current authentication diagnostics for port 1:
#show auth_diagnostics ports 1
Command: show auth_diagnostics ports 1
Port number : 1
MAC address: 00-00-07-5D-60-02
EntersConnecting 3
EapLogoffsWhileConnecting 0
EntersAuthenticating 2
SuccessWhileAuthenticating 2
TimeoutsWhileAuthenticating 0
FailWhileAuthenticating 0
ReauthsWhileAuthenticating 0
EapStartsWhileAuthenticating 0
EapLogoffWhileAuthenticating 0
ReauthsWhileAuthenticated 0
EapStartsWhileAuthenticated 1
EapLogoffWhileAuthenticated 0
BackendResponses 4
BackendAccessChallenges 2
BackendOtherRequestsToSupplicant 0
BackendNonNakResponsesFromSupplicant 2
BackendAuthSuccesses 2
BackendAuthFails 0
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show auth_session_statistics
Purpose Used to display the current authentication session statistics.
Syntax show auth_session_statistics {ports <portlist | all>}
Description This command is used to display the current authentication session statistics
of the switch on a per port basis.
Parameters ports <portlist> - Specifies a range of ports.
all – Specifies that all ports will be viewed.
Restrictions None.