Extreme Networks EAS 100-24t Switch CLI User Manual

Network Management (SNMP) Commands
Extreme Networks EAS 100-24t Switch CLI Manual
85
Example usage:
To enable SNMP trap support on the switch:
Example usage:
To prevent SNMP traps from being sent from the switch:
enable snmp traps
Purpose This command is used to enable SNMP trap support.
Syntax enable snmp traps
Description This command is used to enable SNMP trap support.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#enable snmp traps
Command: enable snmp traps
Success.
#
disable snmp traps
Purpose This command is used to disable SNMP trap support.
Syntax disable snmp traps
Description This command is used to disable SNMP trap support.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable snmp traps
Command: disable snmp traps
Success.
#
config snmp linkchange_traps ports
Purpose Used to configure the sending of linkchange traps and per port control for
sending of change traps.
Syntax config snmp linkchange_traps ports [all | <portlist>] [enable | disable]
Description This command is used to configure the sending of linkchange traps and per
port control for the sending of change traps.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English