Extreme Networks EAS 100-24t Switch CLI User Manual

Port Mirroring Commands
Extreme Networks EAS 100-24t Switch CLI Manual
175
Example usage:
To disable mirroring configurations:
Example usage:
To display mirroring configuration:
Description This command, combined with the enable mirror command above, allows the
user to enter a port mirroring configuration into the switch, and then turn the
port mirroring on and off without having to modify the port mirroring
configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#disable mirror
Command: disable mirror
Success.
#
show mirror
Purpose Used to show the current port mirroring configuration on the switch.
Syntax show mirror
Description This command displays the current port mirroring configuration on the switch.
Parameters None
Restrictions None.
#show mirror
Command: show mirror
Current Settings
Mirror Status : Enabled
Target Port : 1
Mirrored Port :
RX :
TX : 5-7
#
disable mirror

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English