Extreme Networks EAS 100-24t Switch CLI - Show Mld_Snooping Group; Show Mld_Snooping Mrouter_Ports

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
154
Example usage:
To display MLD snooping groups:
show mld_snooping group
Purpose Used to display the current MLD snooping group configuration on the switch.
Syntax show mld_snooping group {[vlan <vlan_name 32> | vlanid <vidlist>]}
Description This command is used to display the current MLD snooping group
configuration on the switch.
Parameters <vlan_name 32> - The name of the VLAN to view MLD snooping group
configuration information.
<vidlist> - The VIDs to view MLD snooping group configuration information.
If no parameters are specified, the system will display all current MLD group
snooping configurations of the switch.
Restrictions None.
#show mld_snooping group
Command: show mld_snooping group
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Port Member : 1-2
Mode : INCLUDE
Source/Group : 2000::100:10:10:5/FF0E::100:0:0:20
VLAN Name/VID : default/1
Port Member : 3
Mode : EXCLUDE
Source/Group : NULL/FF0E::100:0:0:21
VLAN Name/VID : default/1
Port Member : 4-5
Mode : EXCLUDE
#
show mld_snooping mrouter_ports
Purpose Used to display the currently configured router ports on the switch.
Syntax show mld_snooping mrouter_ports {[vlan <vlan_name 32> | vlanid
<vidlist>]} {[static | dynamic | forbidden]}
Description This command is used to display the currently configured router ports on the
switch.