Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 4: Management
Extreme Networks EAS 100-24t Switch CLI Manual
42
Example usage
To display all of the commands in the CLI:
To display the parameters for a specific command:
#?
..
?
cable_diag ports
clear
clear arptable
clear counters
clear fdb
clear log
clear mac_based_access_control auth_mac
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x init
config 802.1x reauth
config access_profile profile_id
config account
config admin local_enable
config arp_aging time
config arpentry
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
#? config account
Command:? config account
Command: config account
Usage: <username>
Description: config user account
#
dir
Purpose Used to display all commands in the CLI.
Syntax dir
Description This command is used to display all of the commands available through the
CLI.
Parameters None.
Restrictions None.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English