Extreme Networks EAS 100-24t Switch CLI User Manual

LLDP Commands
Extreme Networks EAS 100-24t Switch CLI Manual
63
To display remote table entries in detailed mode:
Example usage
To display global statistics information:
# show lldp remote_ports 1 mode detailed
Command: show lldp remote_ports 1 mode detailed
Port ID : 1
---------------------------------------------------------------------------
Remote Entities Count : 1
Entity 1
Chassis Id Subtype : MAC Address
Chassis Id : 00-40-66-10-27-00
Port Id Subtype : Local
Port ID : 1/1
Port Description :
System Name :
System Description :
System Capabilities :
Management Address Count : 0
(None)
Port PVID : 0
PPVID Entries Count : 0
(None)
VLAN Name Entries Count : 0
(None)
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
show lldp statistics
Purpose Used to display the system LLDP statistics information.
Syntax show lldp statistics
Description This command is used to display an overview of neighbor detection activity on
the switch.
Parameters None.
Restrictions None.
# show lldp statistics
Command: show lldp statistics
Last Change Time : 6094
Number of Table Insert : 1
Number of Table Delete : 0
Number of Table Drop : 0
Number of Table Ageout : 0
#

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English