Extreme Networks EAS 100-24t Switch CLI - Basic Switch Commands; Create Account

Basic Switch Commands
Extreme Networks EAS 100-24t Switch CLI Manual
17
Each command is listed, in detail, in the following sections:
delete account <username>
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] | auto_logout [never | 2_minutes |
5_minutes | 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet {<tcp_port_number 1-65535>}
disable telnet
telnet <ipaddr> {tcp_port <value 0-65535>}
enable web {<tcp_port_number 1-65535>}
disable web
save {[config | log | all]}
reboot {force_agree}
reset {[config | system]} {force_agree}
login
logout
clear
enable jumbo_frame
disable jumbo_frame
show jumbo_frame
create account
Purpose Used to create user accounts.
Syntax create account [admin | user] <username 15>
Description This command is used to create user accounts that consist of a username of
1 to 15 characters and a password of 0 to 15 characters. Up to eight user
accounts can be created.
Parameters admin <username> – Name of the administrator account.
user <username> – Name of the user account.
Restrictions Only Administrator-level users can issue this command.
Usernames can be between 1 and 15 characters.
Passwords can be between 0 and 15 characters.
Command Parameters