Extreme Networks EAS 100-24t Switch CLI - Create 802.1 X User

Chapter 9: Security
Extreme Networks EAS 100-24t Switch CLI Manual
252
Example usage:
To display the current authentication statistics for port 1:
Example usage:
To create an 802.1X user:
#show auth_statistics ports 1
Command: show auth_statistics ports 1
Port number : 1
MAC address: 00-00-07-5D-60-02
EapolFramesRx 6
EapolFramesTx 7
EapolStartFramesRx 2
EapolReqIdFramesTx 3
EapolLogoffFramesRx 0
EapolReqFramesTx 2
EapolRespIdFramesRx 2
EapolRespFramesRx 2
InvalidEapolFramesRx 0
EapLengthErrorFramesRx 0
LastEapolFrameVersion 1
LastEapolFrameSource 00-00-07-5D-60-02
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
create 802.1x user
Purpose Used to create a new 802.1X user.
Syntax create 802.1x user <username 15>
Description This command is used to create new 802.1X users.
Parameters <username 15> - A username of up to 15 alphanumeric characters in length.
Restrictions Only Administrator-level users can issue this command.
#create 802.1x user dbrown
Command: create 802.1x user dbrown
Enter a case-sensitive new password:******
Enter the new password again for confirmation:******
Success.
#