Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
178
Example usage:
To clear a port security entry by port:
Example usage:
To display the port security configuration:
Parameters <auth_portlist> - Specifies a port or port range to clear.
Restrictions Only Administrator-level users can issue this command.
# clear port_security_entry port 6
Command: clear port_security_entry port 6
Success.
#
show port_security
Purpose Used to display the current port security configuration.
Syntax show port_security {ports <auth_portlist>}
Description This command is used to display port security information of the switch’s
ports. The information displayed includes port security, admin state, maximum
number of learning address and lock mode.
Parameters <auth_portlist> - Specifies a port or range of ports to be viewed.
Restrictions None.
#show port_security ports 1-10
Command: show port_security ports 1-10
Port Admin State Max. Learning Addr. Lock Address Mode
---- ----------- ------------------ -----------------
1 Disabled 1 DeleteOnTimeout
2 Disabled 1 DeleteOnTimeout
3 Disabled 1 DeleteOnTimeout
4 Disabled 1 DeleteOnTimeout
5 Disabled 1 DeleteOnTimeout
6 Disabled 1 DeleteOnTimeout
7 Disabled 1 DeleteOnTimeout
8 Disabled 1 DeleteOnTimeout
9 Disabled 1 DeleteOnTimeout
10 Disabled 1 DeleteOnTimeout
#
clear port_security_entry port

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English