Extreme Networks EAS 100-24t Switch CLI User Manual

Loopback Detection Commands
Extreme Networks EAS 100-24t Switch CLI Manual
145
Example usage
To disable the loopback detection function on the switch:
Example usage:
To display the current loopback detection configuration on the switch:
# disable loopdetect
Command: disable loopdetect
#
show loopdetect
Purpose Used to display the switch’s current loopback detection configuration.
Syntax show loopdetect
Description This command is used to display the switch’s current loopback detection
configuration.
Parameters None.
Restrictions None.
#show loopdetect
Command: show loopdetect
Loopdetect Global Settings
---------------------------
Loopdetect Status : Enabled
Loopdetect Interval : 20
Recover Time : 0
#
show loopdetect ports
Purpose Used to display the loopback detection configuration per port on the switch.
Syntax show loopdetect ports [<portlist> | all]
Description This command will display the switch’s current per-port loopback detection
configuration and status.
Parameters <portlist> – Specifies a range of ports to be displayed.
all – To display all the ports in the system, use the all parameter.
Restrictions None.

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English