Extreme Networks EAS 100-24t Switch CLI - Show Stp Ports

Chapter 5: Layer 2 Features
Extreme Networks EAS 100-24t Switch CLI Manual
166
Status 2 : STP enabled for RSTP
Status 3 : STP enabled for MSTP
#show stp
Command: show stp
STP Bridge Global Settings
--------------------------
STP Status : Enabled
STP Version : RSTP
Max Age : 20
Hello Time : 2
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
#
#show stp
Command: show stp
STP Bridge Global Settings
--------------------------
STP Status : Enabled
STP Version : MSTP
Max Age : 20
Forward Delay : 15
Max Hops : 20
TX Hold Count : 6
Forwarding BPDU : Enabled
#
show stp ports
Purpose Used to display the switch’s current STP ports configuration.
Syntax show stp ports {<portlist>} {instance <value 0-4>}
Description This command is used to display the STP port settings for a specified port or
group of ports.