Extreme Networks EAS 100-24t Switch CLI User Manual

Chapter 6: Layer 3 Features
Extreme Networks EAS 100-24t Switch CLI Manual
204
Example Usage:
To display the ARP table:
Example Usage:
To remove dynamic entries in the ARP table:
#show arpentry
Command: show arpentry
ARP Aging Time : 20
Interface IP Address MAC Address Type
------------- --------------- ----------------- ---------------
System 10.0.0.0 FF-FF-FF-FF-FF-FF Local/Broadcast
System 10.6.51.15 00-1D-60-E7-B5-CD Dynamic
System 10.22.8.50 00-80-C8-DF-E8-EE Dynamic
System 10.30.28.112 00-30-28-01-12-02 Dynamic
System 10.39.77.24 08-00-01-43-00-00 Dynamic
System 10.44.8.253 00-44-08-FD-09-09 Dynamic
System 10.53.7.12 00-50-BA-11-11-04 Dynamic
System 10.56.85.10 00-0E-A6-8F-72-EA Dynamic
System 10.67.33.67 00-00-E2-58-DB-CF Dynamic
System 10.71.77.126 00-04-96-20-D5-25 Dynamic
System 10.73.21.11 00-19-5B-EF-78-B5 Local
System 10.73.60.106 00-00-00-11-12-13 Dynamic
System 10.255.255.255 FF-FF-FF-FF-FF-FF Local/Broadcast
Total Entries : 15
#
clear arptable
Purpose Used to remove all dynamic ARP table entries.
Syntax clear arptable
Description This command is used to remove dynamic ARP table entries from the switch’s
ARP table. Static ARP table entries are not affected.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
#clear arptable
Command: clear arptable
Success.
#

Extreme Networks EAS 100-24t Switch CLI Specifications

General

Brand	Extreme Networks
Model	EAS 100-24t Switch CLI
Category	Switch
Language	English